Metal Forming Tech SA

PUNCHING JOBBING NOTCHING > Variable Angle Notching >

Notching machines > AV180°

The AV180° series is the only machine on the market with a cutting capacity of up to 180 degrees without moving the sheet metal from one angle to the other.

It is for this very characteristic that it lends itself to use in automatic lines and in CN.

The shearing head in GS500 is mounted on four anti-flexion columns and the robust supports on the head and under the workbench guarantee absolute machine rigidity.

The direct frontal reading of the cutting angle avoids laborious calculations between the blades and the squares.

Notching machines > AV224/B

The variable angle notching machine AV224/B has a solid structure, a shearing head in GS500 fusion with downwards movement.

The workbench is fitted with conical slots for housing of the squares.

These conical slots have been designed especially to give greater rigidity to the squares to guarantee greater precision.

The cutting capacity of variable angle notching machine is of 4mm thickness and the cutting angle can be adjusted from 30 degrees to 140 degrees.

Subject of a Simasv patent, the most important characteristic of the variable angle notching machine AV226/B is the automatic adjustment of the slack between the blades from 1mm to 4mm in thickness.

The cut may start from the tip or the base of the blades and the auto-adjustment system between the upper and lower blades allows simultaneous cutting of different thicknesses.

The machine is also equipped with a hydraulic blade blockage.

 


Email Us:  sales@mftsa.co.za
Call Us: +27 (0) 83 273 8322