Metal Forming Tech SA

PUNCHING JOBBING NOTCHING > Bevelling >

Bevelling machines

The Simasv bevelling machines are robust, compact and easy to transport suited to the bevelling of iron and stainless steel.

The mill group has a double rotation sense, which is selectable via a special selector with an immediate emergency system.

The mill group is able to realise bevels of various angles, 22°30' - 30° - 37°30' - 45° - 55°, by tilting the sheet metal running roll to the appropriate angle.

Simasv bevelling machines are offered in two models, the SP12V and SM20.

The portable SP12V bevelling machine is strongly constructed in cast iron, capable of supporting loads considerably higher than all cutting stresses.

It is easy to transport and thanks to its contained weight and dimensions, it can be connected to large dimension pieces to be bevelled without the need to move the pieces.

The maximum bevel depth at 30 degrees is 18mm on sheet metal in iron.

The SM20 bevelling machine, the largest model which can bevel sheet metals up to 50mm thick, is fitted with wheels to allow the bevelling of even pieces with very large dimensions without the need to move them.

The maximum bevel depth at 30 degrees is 26mm on sheet metal in iron.

Bevelling machines > SP12V

This machine has a solid monolithic structure, made of spheroid cast iron able to withstand loads greater than all cutting stresses.

It can be effortlessly moved from one place to another, performing bevels on metal sheets with various weights and thickness.

There is also the possibility of placing the machine on wheels for large pieces to be bevelled, without handling them.

The machine can carry out maximum bevels of 12mm on metal sheet with a cutting speed of 3mt/minute.

Clockwise and anticlockwise rotation of milling cutter controlled by remote control (24 V.) complete with immediate emergency system.

The machine can bevel several angles simply by tilting the sheet feeding roller at the required measure, from 22°30' to 55°.


Bevelling machines > SM20

This machine has a solid monolithic structure made of spheroid cast iron and able to withstand loads greater than all cutting stresses.

It can be moved from one place to another, performing bevels on metal sheets with various weights and thickness.

There is also the possibility of placing the machine on wheels for large pieces to be bevelled without handling them.

The machine can carry out maximum bevels of 12mm on metal sheet (Fe 40 kg/mm2) with a cutting speed of 3mt/minute.

Clockwise and anticlockwise rotation of milling cutter controlled by remote control (24 V) complete with immediate emergency system.

The machine can bevel several angles simply by tilting the sheet feeding roller at the required measure, from 22°30' to 55°.

 


Email Us:  sales@mftsa.co.za
Call Us: +27 (0) 83 273 8322