Metal Forming Tech SA

Accessories >

Metalforming Technology SA stresses the importance of proper roll tooling as paramount to the success of any metal forming operation.

COILS TILTERS
These devices permit the 90°, coils tilting from hole in the horizontal axis
to vertical axis and vice-versa.
• Their operation can be electro-mechanical or electro-hydraulic
• Valid and qualified safety systems
• Protection to avoid material damages

COILS CARS
These coils cars run on railways and permit the transport of coils on the ground.
We can offer coils cars with one, two, three cradles located transversely or longitudinally respect to the running direction

GRAB FOR COILS WITH HOLE IN THE HORIZONTAL AXIS
These grabs permit the gripping and the handling of coils with hole in the horizontal axis.
Our company has succeeded in reducing the external structural dimensions of its equipment, both in width and in height. These machineries are designed to have reduced structural weight and minimum external dimension.
They can have various options:
• Safety system
• 360° rotation device
• Protections to avoid coils damages
• Weighing device
• Remote control

“C” HOOKS FOR COILS
The “C” shaped products - divided
into 27 standards models - are for lifting and handling coils with a hole in the horizontal axis of different sizes and weights. These equipment can be supplied with options to increase the safety
and to avoid coils damages:
• Horizontal support widened
• Protection of the horizontal part
• Protection of the internal vertical part
• Safety tooth on the final part of the horizontal support • Storage frame

LIFTING BEAMS
Beams are equipment for handling sections, pipes, packs of sheet stacks, boxes and other metallurgical materials. Depending on the material to be handled: Beams for handling “narrow products”, such as bundles and profiles, fitted with single hooks in central position along the longitudinal axis. Beams for handling “wide products”, such as packs of steel sheet and boxes,
fitted with pair of hooks located in a lateral position along the longitudinal axis.

GRAB FOR HANDLING SHEET METAL PACK
These grabs permit the handling of sheet metal packs on pallets or on packing blocks. All this equipment can be fitted with various options such as:
• Safety systems
• 360° rotation device
• Different types of arms under sheet packs dimensions
• Weighing device
• Remote control

VACUUM SHEET LIFTER
This vacuum sheet lifter permits the moving and handling of “long products”,
such as sheet in stainless steel, sheet of carbon steel, aluminium and other materials.

GRAB FOR HANDLING BLOOMS AND PLATES
These grabs permit the extraction of slabs and plates from the casting well, and to tilt them through 90° from the vertical position to the horizontal one. They lay the product on the ground  in orizontal position.

AERIAL TILTING GRABS
These grabs are specifically studied and designed for aerial tilting of coils with the hole in vertical axis to one in the horizontal axis and vice versa. All these devices are fitted with safety devices to maintain the grip of coils, even in the event of electric power failure

MOTORIZED ROTATIONS
This kind of accessories permit the motorised rotation of lifting equipment for 270° or for 360° continuous right/left. This rotation can be applied to other pre-existing equipment utilized in the customer’s establishment. Maximum load capacity is up to 50.000 kg/50 tons or under customer needs. All the devices are construct following CE regulations

COIL STORAGE
Plastic Wedges with the technical features of the polyurethane, provided with four holes in the lower part to be positioned in galvanized steel rails.
•      Storage into three levels of height and capacity up to 100 Ton
•      Suitable for coils with external diameter between 500-2500 mm
•      Maximum safety in warehouse
•      They won’t damage your coils
•      Splinter free and oil resistant
•      Long life
•      Economical and easy to use because positioned on standard profiles
•      Max temperature 60°C or 110°C
•       Space saving, high quality and no more damaged coils

COIL TRAYS
Suitable for coils with external diameter between 500-2500 mm
•     Maximum safety in warehouse
•     They do not damage your coils
•     Capacity up to 40 Ton
•     Splinter free and oil resistant
•     Long life
•     Inexpensive, easy to use and easily transportable
•     Max temperature 60°C or 110°C
•     Version with metallic structure for forklift handling available.
This system allows coils easy storage also in temporary areas.

COIL WEDGES
 Suitable for coils with external diameter between 700-2200 mm.
 Capacity up to 50 Ton
 Maximum safety in warehouse
 They do not damage your coils
 Splinter free and oil resistant
 Long life
 Inexpensive and easy to use because positioned on profiles UNP180.

Length           Width         Angle         Coil wedge Max Capacity
1000 mm      180 mm     30°             50.000 Kg

This safety system protects your slitted coils without damage them.
Eliminated the continuous costs to substitute wood bars.
Eliminated the costs to clean the storage area due to wood splinters.

COIL ROLL BLOCKS
Storage into three levels of height and capacity up to 100 Ton, TÜV
certified
 Suitable for coils with external diameter between 500-2500 mm
 Maximum safety in warehouse
 They won’t damage your coils
 Splinter free and oil resistant
 Long life
 Economical and easy to use because positioned on profiles UNP 180 standard
 Space saving, high quality and no more damaged coils.

  


Email Us: sales@mftsa.co.za

Call Us:+27 (0) 83 273 8322